Indium Tin Oxide Glass (ITO) o se vaega o matatioata ta'avale Transparent Conducting Oxide (TCO). O le tioata ufiufi ITO o loʻo i ai mea e sili ona lelei le faʻatautaia ma le maualuga o le transmittance. Fa'aaoga tele i su'esu'ega fale su'esu'e, fa'aola la ma atina'e.
O le mea sili, o le tioata ITO e tipi leisa i sikuea poʻo faʻataʻi faʻataʻitaʻi, o nisi taimi e mafai foi ona faʻavasegaina e pei o le liʻo. Ole maualuga ole lapo'a gaosia ole 405x305mm. Ma o le mafiafia masani o le 0.33 / 0.4 / 0.55 / 0.7 / 0.8 / 1.0 / 1.5 / 2.0 / 3.0 mm ma le faapalepale pulea ± 0.1mm mo le tele tioata ma ± 0.02mm mo le mamanu ITO.
tioata ma le ITO e ufiufi i itu e lua matioata ITO mamanuo lo'o maua fo'i ile tioata Saida.
Mo le fa'amamāina, matou te fautua atu e fa'amama i le fuga e leai se lint sili ona lelei e fufui i totonu o le solvent e ta'ua o le isopropyl alcohol. Alkali e fa'asa ona solo i luga, aua o le a mafua ai le fa'aleagaina e le mafai ona fa'afoliga i luga o le ITO coating surface.
O le pepa fa'amaumauga lea mo tioata fa'aulu a le ITO:
| ITO PEPEA O ASO | ||||
| Fa'amatalaga. | Tete'e | Ufiufi Mafiafia | Tuuina atu | Taimi Etching |
| 3ohm | 3-4ohm | 380±50nm | ≥80% | ≤400S |
| 5ohm | 4-6ohm | 380±50nm | ≥82% | ≤400S |
| 6ohm | 5-7ohm | 220±50nm | ≥84% | ≤350S |
| 7ohm | 6-8ohm | 200±50nm | ≥84% | ≤300S |
| 8ohm | 7-10ohm | 185±50nm | ≥84% | ≤240S |
| 15ohm | 10-15ohm | 135±50nm | ≥86% | ≤180S |
| 20 ohms | 15-20ohm | 95±50nm | ≥87% | ≤140S |
| 30ohm | 20-30ohm | 65±50nm | ≥88% | ≤100S |
Taimi meli: Mati-13-2020
