Muraayadaha Indium Tin Oxide Glass (ITO) waa qayb ka mid ah muraayadaha wax-qabadka ee Transparent Conducting Oxide (TCO).Muraayadda dahaarka leh ee ITO oo leh sifooyin wax-qabad oo heersare ah oo sarreeya.Inta badan waxaa loo isticmaalaa cilmi baarista shaybaadhka, panel qoraxda iyo horumarinta.
Inta badan, muraayadda ITO waa laser loo gooyay qaab labajibbaaran ama qaab leydi ah, mararka qaarkood waxaa sidoo kale loo habeyn karaa sidii goobada.Cabbirka ugu badan ee la soo saaray waa 405x305mm.Dhumucda caadiga ah waa 0.33 / 0.4 / 0.55 / 0.7 / 0.8 / 1.0 / 1.5 / 2.0 / 3.0 mm oo leh dulqaad la xakameyn karo ± 0.1mm cabbirka muraayadda iyo ± 0.02mm ee qaabka ITO.
Muraayad leh ITO oo ku dahaaran laba dhinac iyomuraayadda ITO qaabaysanWaxa kale oo laga heli karaa muraayadda Saida.
Ujeeddada nadiifinta, waxaan soo jeedinaynaa in lagu nadiifiyo suuf aan lahayn suuf tayo sare leh oo lagu rusheeyey dareeraha loo yaqaan khamriga isopropyl.Alkali waa mamnuuc in lagu masaxo dushiisa, sababtoo ah waxay u keeni doontaa dhaawac aan laga soo kaban karin oogada daahan ITO.
Halkan waxaa ah xaashi xog ah oo loogu talagalay muraayadda wax-qabadka ee ITO:
| XAASHI TAARIIKHDA ITO | ||||
| Spec. | iska caabin | Dhumucda dahaarka | Gudbinta | Waqtiga Etching |
| 3ohms | 3-4ohm | 380± 50nm | ≥80% | ≤400S |
| 5ohms | 4-6 ohm | 380± 50nm | ≥82% | ≤400S |
| 6ohms | 5-7ohm | 220± 50nm | ≥84% | ≤350S |
| 7ohms | 6-8 ohm | 200± 50nm | ≥84% | ≤300S |
| 8ohms | 7-10ohm | 185± 50nm | ≥84% | ≤240S |
| 15ohms | 10-15ohm | 135± 50nm | ≥86% | ≤180S |
| 20ohms | 15-20ohm | 95±50nm | ≥87% | ≤140S |
| 30ohms | 20-30ohm | 65± 50nm | ≥88% | ≤100S |
Waqtiga boostada: Mar-13-2020
