Scratch/Dig ithathela ingqalelo njengeziphene zokuthambisa ezifumaneka kwiglasi ngexesha lokulungiswa nzulu. Okukhona usezantsi umlinganiselo, kokukhona ungqongqo umgangatho. Isicelo esithile sinquma umgangatho womgangatho kunye neenkqubo zovavanyo eziyimfuneko. Ngokukodwa, ichaza ubume bepolish, indawo yokukrazula kunye nokumba.
Imikrwelo– Umkrwelo uchazwa njengawo nakuphi na “ukukrazuka” okungaphezulu komphezulu weglasi. Ibakala lomkrwelo libhekisa kububanzi bomkrwelo kunye nokutshekisha ngokuhlola okubonwayo. Izinto zeglasi, iingubo kunye nemeko yokukhanyisa nayo ichaphazela ukubonakala kokukrazula kwinqanaba elithile.
Ukwemba– Ukugrumba kuchazwa njengomngxuma okanye icrater encinci kumphezulu weglasi. Idigri yokumba imele ubukhulu bokwenene bokwemba kwikhulu leemilimitha kwaye ihlolwe ngobubanzi. Idayamitha yedig enemilo engaqhelekanga yi ½ x (Ubude + Ububanzi).
Scratch/Dig Standards Table:
| Scratch/Dig iBanga | Khubula uMax. Ububanzi | Dig Max. Ububanzi |
| 120/80 | 0.0047” okanye (0.12mm) | 0.0315” okanye (0.80mm) |
| 80/50 | 0.0032” okanye (0.08mm) | 0.0197” okanye (0.50mm) |
| 60/40 | 0.0024” okanye (0.06mm) | 0.0157” okanye (0.40mm) |
- I-120/80 ithathwa njengomgangatho worhwebo
- I-80/50 ngumgangatho oqhelekileyo owamkelekileyo womgangatho wokuthambisa
- I-60/40 isetyenziswa kwizicelo ezininzi zophando lwezenzululwazi
- I-40/20 ngumgangatho womgangatho we-laser
- I-20/10 ngumgangatho ochanekileyo womgangatho we-optics
I-Saida Glass ngumboneleli owaziwayo weglasi yehlabathi jikelele womgangatho ophezulu, ixabiso elikhuphisanayo kunye nexesha lokuhambisa elifika ngexesha. Ngokwenza iglasi ngokwezifiso kwiindawo ezininzi ezahlukeneyo kunye nokugxila kwipaneli yokuchukumisa, iglasi epholileyo, iglasi ye-AG / AR / AF kunye nesikrini sokuchukumisa sangaphakathi nangaphandle.
Ixesha lokuposa: Sep-11-2019
