I-Indium tin oxide glass (ITO) iyingxenye ye-Transparent evutha i-oxide (TCO) izibuko ezisebenzayo. Ingilazi ehlanganiswe yi-ITO enezindawo ezinhle kakhulu zokuhambisa nezingcindezi eziphakeme. Isetshenziswa ikakhulukazi ocwaningweni lwe-lab, iphaneli yelanga nentuthuko.
Ngokubanzi, ingilazi ye-ITO yi-laser yasikwa esikwele noma isikwele, kwesinye isikhathi kungahle kube ngokwezifiso njengombuthano. Ubukhulu obukhiqizwayo obukhulu ngu-405x305mm. Futhi ubukhulu obujwayelekile ngu-0.33 / 0.4 / 0.55 / 0.7 / 0.7 / 0.7 / 0.8 / 1.0 / 1.5 mm ngokubekezelela okulawulayo ± 0.1mm ngosayizi wengilazi kanye ± 0,02mm ngephethini ye-Ito.
Ingilazi ene-Ito ehlanganiswe ezinhlangothini ezimbili futhiIngilazi ye-Ito ephethweziyatholakala futhi e-USA Glass.
Ngenhloso yokuhlanza, siphakamisa ukuyihlanza ngokotoni osezingeni eliphakeme le-lint-free efakwe ku-solvent ebizwa ngokuthi yi-isopropyl alcohol. U-Alkala anqatshelwe ukusula phezu kwaso, ngoba kuzodala ukulimala okungaphenduki ku-Ito Coating Porce.
Nayi ishidi ledatha le-ITO ephethe ingilazi:
| I-Ito Date Sheet | ||||
| I-spec. | Inkani | Ukuqina kokuqina | Ukudlulisela | Isikhathi soku-etching |
| I-3MS | 3-4Ohm | 380 ± 50NM | ≥80% | ≤400s |
| 5ms | 4-6hm | 380 ± 50NM | ≥82% | ≤400s |
| I-6MS | 5-7OHM | 220 ± 50NM | ≥84% | ≤350s |
| 7ms | 6-8Ohm | 200 ± 50NM | ≥84% | ≤300s |
| 8ohms | 7-10OHM | 185 ± 50NM | ≥84% | ≤240s |
| I -HovMS | 10-15OHM | 135 ± 50NM | ≥86% | ≤180s |
| 20MM | 15-20HM | 95 ± 50NM | ≥87% | ≤140s |
| 305ms | 20-30OHM | 65 ± 50NM | ≥88% | ≤100s |
Isikhathi sePosi: Mar-13-2020
